PETER WRAGGE SUPPLIES

Felsham, Bury St. Edmunds, Suffolk
Tel : 01449 737192 or Fax : 01449 736666

 

FLASHINGS & GUTTERS

 
 
A COMPLETE RANGE OF FLASHINGS FOR USE ON ALL SYSTEM DESIGN BUILDINGS

 

 

Flashings can be purpose made to any shape and size, we can also provide Z purlins and the extensively used sleeved purlin system.

It is important that flashings and trim are versatile and practical, but perhaps the ability to enhance the appearance of any building is of prime concern.

PWS standard range of flashings and trims compliment our roofing and cladding products.

In addition to the examples illustrated opposite other flashings can be made to individual requirements.

Please call 01449 737192 or fax 01449 736666 TODAY for further details, prices terms etc.

And don't forget we also
offer FREE advice.

 
 
FILLERS, LIGHTING & FIXINGS
 
 
FILLER BLOCKS AND TRANSLUCENT GLASS FIBRE SHEETS FOR SYSTEM BUILDINGS
 

 

 

All accessories, lighting and fixings are available for any application

 

FILLERS
Filler blocks are an essential component in the make-up of modern constructions. When correctly specified and filled, the filler blocks seal the cavities between the profiled sheets and the purlins or trims. To perform as a true weather barrier the fillers should exhibit the following characteristics:

  • Adequate compress ability
  • Closed cell structure with no porosity
  • Heat retention properties
  • Longlife without embrittlement

A variety of PWS fillers are available for various applications including; angled filler blocks for hip roof designs, ventilated fillers for environments where condensation problems may prevail. This type of filler enables air to circulate properly.

ROOFLIGHT SHEETING
Trilite profiled translucent glass fibre reinforced polyester sheets and double skin rooflights allow diffused daylight into the building.
All translucent sheeting has a colourless appearance with a fine random texture of the underlying glass fibre/resin composite.
The resins themselves contain UV inhibitors and fire retardance.

FIRE RETARDANCE
Various grades of Trilite are available which comply with relevant parts of BS476.

A COMPLETE RANGE OF FIXINGS
PWS supply a comprehensive range of fasteners for both insulated and single skin applications onto steel or timber purlins.
All our fasteners are manufactured from high quality, cold forming steel, heat treated to give mechanical strength and excellent drilling qualities. Screws are mechnically coated with zinc with a dichromate passivation for added protection.
Special high performance coatings are included on some parts.

 

 

 

Select Below
XPantile Information &
Insulation Systems
Home Page
Care in Handling &
Enquiry Form

 

Felsham, Bury St. Edmunds, Suffolk Tel : 01449 737192 or Fax : 01449 736666